1 4

TMS ReFlex™ Harness BMW™

$1,599.00

Included:

  • ReFlex™ plug and play harness

This plug and play harness connects to all of the following: port injection, ethanol sensor, low pressure fuel sensor, charge pipe, intake CAM, and crank sensor.

  • CAN + power splitter

The CAN + power splitter connects the harness to the body domain controller in the passenger footwell behind the kick-plate.

  • Auxiliary cable pack

Four additional cables are included to simplify future expansions such as additional sensors, methanol, or NOS.  These 8 ft. cables plug directly into the unused ReFlex™ harness auxiliary ports Aux Out 1/2/3 and Aux in 4 (PSI).

    • ReFlex Plus™
    • ReFlex Plus™ mounting bracket

    The mounting bracket holds the ReFlex™ safely in place in the access compartment next to the engine bay on the passenger side.

    Available with or without ReFlex Plus™ and Motiv™ 0-10 Bar Pressure Sensor

     

    B58 GEN 1 - Plug and play harness for ReFlex Plus™ for BMW B58™ engine B58B30M0.

    B58 GEN 2 - Plug and play harness for ReFlex Plus™ for BMW B58™ engine B58B30O1.

    G8X - Plug and play harness for ReFlex Plus™ for BMW G8X™ engine S58.

     

    B58 GEN 1 - Compatible Car Models:

    • 2015-2019 BMW™ 340i F30/F31/F34
    • 2016-2019 BMW™ 440i F32/F33/F36
    • 2016-2021 BMW™ M240i F22/F23

     

    B58 GEN 2 - Compatible Car Models:

    • 2018-present BMW™ 340i G20
    • 2021-present BMW™ 240i G22
    • 2022-present BMW™ 440i G42
    • 2018-present BMW™ X3M40i G01

     

    G8X - Compatible Car Models:

    • 2021-present BMW™ M3 G80
    • 2021-present BMW™ M4 G82
    • 2021-present BMW™ M4 convertible G83
    • 2023 BMW™ M2 G8X
    • 2019-present BMW™ X3M

     

    Click HERE for more information on these kits.

    ENGINE
    WITH OR WITHOUT
    FIRMWARE UPDATE

    Pickup available at Shop location

    Usually ready in 24 hours

    ENGINE
    WITH OR WITHOUT
    FIRMWARE UPDATE

    DISCLAIMER

    TMS ReFlex™ Harness Kits are designed for competition closed course use only and require tuning from companies such as EcuTek™, BootMod3™, and MHD™.  These kits may be used in conjunction with flex fuel; please note that exceeding the manufacturer’s recommended ratio of ethanol content without proper tuning may cause severe damage to the engine. Modifying a car for racing purposes can have legal implications and may void warranties. Additionally, it is essential to adhere to local regulations and safety guidelines when making modifications to your vehicle. Tensility Motor Sports does not accept liability for any mechanical, electrical, or other failure as a result of installation and use, or of improper tuning.

    NO MODIFICATIONS

    Under no circumstances should Tensility Motor Sports products be altered, modified, disassembled, or tampered with in any way. Any modifications to the products not expressly approved by Tensility Motor Sports will void the product warranty and may cause damage to the products or your vehicle, for which Tensility Motor Sports will not be responsible.